Tweco Victor Torch Handles,Cutting Attachments Manual de usuario descargar pdf (Pagina 25)

7-21

NOTE:

The above data applies to all torches with the following exceptions:

Torch Series Pre-heat Oxygen Pre-heat Fuel

MT 200 Series N/A 8 oz. - Up

MT 300 Series 10-50 PSIG 8 oz. - Up

* Applicable for 3-hose machine cutting torches only. With a two hose cutting torch,

preheat pressure is set by the cuttting oxygen.

** For best results use HC1200C and HC1100C series torches and 3/8" hose when using

a size 6 tip or larger.

*** All pressures are measured at the regulator using 25' x 3/8" hose for tip size 6 and

larger.

WARNING

High gas withdrawal rates require use of a manifold system of sufﬁcient size to

supply the necessary volume. High gas withdrawal rates may also require use

of a vaporizer.

CAUTION

Always make sure your equipment is rated for the size tip you have selected. A tip

with too much capacity for the equipment can starve or choke the tip. This causes

overheating of the head and a backﬁre may result. Use only genuine VICTOR

Cutskill

or Firepower

cutting tips, welding nozzles and multi-ﬂame nozzles to

ensure leak-free connections and balanced equipment.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 93 94

Sin comentarios

Tweco Victor Torch Handles,Cutting Attachments Manual de usuario Pagina 25