Tweco Victor Thermal Dynamics Power Module Upgrade Kit Manual de usuario descargar pdf (Pagina 5)

Manual 0-5326 5

12. Pass orange and black power cables through center panel to the coolant side as in the lower holes and wire

tie the bundle together.

Art # A-12329

13. Attach orange and black power cables to the buss bars using a 10mm nut driver. Tighten the cables in place

making sure they are not touching the buss bars.

Art # A-12330

WARNING

EnsurethattheorangecablesareattachedtothetopbarandBlacktothebottom.

NOTE

Dependingonthecurrentrange,wiresmayberoutedfromthecenteruporfromthetopdown.Eitheris

acceptable as long as the color code is correct and the wire is not touching the buss bar

1 2 3 4 5 6 7 8 9 10 ... 15 16

Sin comentarios

Tweco Victor Thermal Dynamics Power Module Upgrade Kit Manual de usuario Pagina 5